Industrial
Cat® C3.6 Diesel Engine for Tractors
-
Maximum Power134 HP
-
Maximum Torque391 lb-ft @ 1500 rpm
-
Rated Speed2000-2400 rpm
-
Minimum Power74 HP
Power Rating
- Maximum Power
- 134 HP
- Maximum Torque
- 391 lb-ft @ 1500 rpm
- Rated Speed
- 2000-2400 rpm
- Minimum Power
- 74 HP
Emission Standards
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 4
- Bore
- 3.9 in
- Stroke
- 4.7 in
- Displacement
- 220 in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF or DOC+DPF+SCR
Engine Dimensions - Approximate
- Length
- 26.8 in
- Width
- 22.2 in
- Height
- 33.7 in
- Weight
- 840 lb
-
Control System
- Starter motor (12V)
- Alternator (12V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus SAE J1939
-
Flywheels and Flywheel Housing
- Agricultural back plate for transmission mounting
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
-
Fuel System
- Fuel filter – chassis mounted
- With water sensor
-
Lube System
- Lubricating oil filters
- High incline oil pan – 25° continuous in all directions
-
General
- Cold start capability to -25° C (-13° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
-
U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC) and Diesel Particulate Filter (DPF)
- Selective Catalytic Reduction (SCR) (not required <56 kW)