Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Compact Wheel Loaders

920 Compact Wheel Loader

  • Maximum Gross Power
    121 HP
  • Maximum Gross Power
    2200 r/min
  • Maximum Gross Power
    121 HP
  • Maximum Gross Power
    122 HP
Engine
Maximum Gross Power
121 HP
Maximum Gross Power
2200 r/min
Maximum Gross Power
121 HP
Maximum Gross Power
122 HP
Rated Net Power
2200 r/min
Maximum Gross Power
2200 r/min
Rated Net Power
2200 r/min
Rated Net Power
120 HP
Maximum Gross Power
122 HP
Rated Net Power
120 HP
Rated Net Power
118 HP
Rated Net Power
118 HP
Maximum Gross Torque
372 ft·lbf
Maximum Gross Torque
372 ft·lbf
Maximum Gross Torque
369 ft·lbf
Maximum Gross Torque
369 ft·lbf
Maximum Net Torque
366 ft·lbf
Maximum Net Torque
366 ft·lbf
Maximum Net Torque
363 ft·lbf
Maximum Net Torque
363 ft·lbf
Displacement
220 in³
Displacement
220 in³
Bore
3.85 in
Bore
3.85 in
Stroke
4.72 in
Stroke
4.72 in
Engine Model
Cat C3.6
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power
2350 r/min
Maximum Gross Power
122 HP
Maximum Gross Power
123 HP
Rated Net Power
120 HP
Maximum Gross Power
121 HP
Maximum Gross Power
121 HP
Weights
Operating Weight
21742 lb
Operating Weight
21742 lb
Buckets
Bucket Capacities
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities
2.5-3.5 m³ (3.3-4.6 yd³)
Bucket Capacities
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities
2.5-3.5 m³ (3.3-4.6 yd³)
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Steering
Maximum Working Pressure
3190 psi
Steering Cycle Times
2.3 s
Steering Articulation Angle
40 °
Number of Steering Wheel Turns
3.4 turns
Maximum Flow
21.7 gal/min
Maximum Working Pressure
3190 psi
Steering Cycle Times
2.3 s
Steering Articulation Angle
40 °
Number of Steering Wheel Turns
3.4 turns
Maximum Flow
21.7 gal/min
Loader Hydraulic System
Relief Pressure
4641 psi
Maximum Flow
25 gal/min
Maximum Flow
43.6 gal/min
Relief Pressure
4641 psi
Relief Pressure
4641 psi
Hydraulic Cycle Time
2.7 s
Note
All cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure
4061 psi
Hydraulic Cycle Time
11.5 s
Hydraulic Cycle Time
2.2 s
Maximum Flow
25 gal/min
Hydraulic Cycle Time
1.8 s
Hydraulic Cycle Time
4.8 s
Maximum Flow
40 gal/min
Relief Pressure
4641 psi
Maximum Flow
25 gal/min
Maximum Flow
43.6 gal/min
Relief Pressure
4641 psi
Hydraulic Cycle Time
2.7 s
Note
All cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure
4061 psi
Hydraulic Cycle Time
11.5 s
Hydraulic Cycle Time
2.2 s
Maximum Flow
25 gal/min
Hydraulic Cycle Time
1.8 s
Hydraulic Cycle Time
4.8 s
Maximum Flow
40 gal/min
Service Refill Capacities
Transmission
0.8 gal (US)
Transmission
0.8 gal (US)
Engine Crankcase
2.6 gal (US)
Diesel Exhaust Fluid
4.8 gal (US)
Axles
4.5 gal (US)
Cooling System
5.7 gal (US)
Hydraulic System
25.9 gal (US)
Axles
4.5 gal (US)
Fuel Tank
43.6 gal (US)
Hydraulic Tank
14.5 gal (US)
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Engine Crankcase
2.6 gal (US)
Diesel Exhaust Fluid
4.8 gal (US)
Axles
4.5 gal (US)
Cooling System
5.7 gal (US)
Hydraulic System
25.9 gal (US)
Axles
4.5 gal (US)
Fuel Tank
43.6 gal (US)
Hydraulic Tank
14.5 gal (US)
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse
25 mile/h
Forward and Reverse
12.5 mile/h
Forward and Reverse
6.3 mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse
25 mile/h
Forward and Reverse
12.5 mile/h
Forward and Reverse
6.3 mile/h
Axles
Rear
Oscillating ±11 degrees; Locking differential (standard)
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (standard)
Front
Fixed; Locking differential (standard)
Cab
ROPS
ISO 3471:2008
ROPS
ISO 3471:2008
FOPS
EN ISO 3449:2008 (ISO 3449:2005)
FOPS
EN ISO 3449:2008 (ISO 3449:2005)
Note
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
*The measurements were conducted with the cab doors and windows closed.
Note
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
*The measurements were conducted with the cab doors and windows closed.
Tires
Other Choices Include
17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size
17.5 R25 L2 XTLA
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Other Choices Include
17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size
17.5 R25 L2 XTLA
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.