Offshore Drilling and Production Generator Sets
3512C (HD) Offshore Generator Set
-
Minimum Rating1938 kV·A
-
Maximum Rating2125 kV·A
-
EmissionsIMO Tier II
-
AspirationTurbocharged-Aftercooled
Engine Specifications
- Minimum Rating
- 1938 kV·A
- Maximum Rating
- 2125 kV·A
- Emissions
- IMO Tier II
- Aspiration
- Turbocharged-Aftercooled
- Fuel System
- EUI
- Oil Change Interval
- 1000.0 hr
- Stroke
- 8.5 in
- Bore
- 6.7 in
- Displacement
- 3574.0 in3
- Engine Control
- ADEM A3
- Weight
- 33300 lb
- Aspiration
- Turbocharged-Aftercooled
- Bore
- 6.7 in
- Displacement
- 3574 in³
- Fuel System
- EUI
- Oil Change Interval
- 1000 h
- Stroke
- 8.5 in
Dimensions
- Length
- 214.5 in
- Height
- 91.0 in
- Width
- 71.9 in
- Height
- 91 in
- Length
- 214.5 in
- Width
- 71.9 in
Capacity for Liquids
- Cooling System
- 41.5 gal
- Lube Oil System
- 84.0 gal
- Cooling System
- 41.5 gal (US)
- Lube Oil System
- 84 gal (US)
-
AIR INLET SYSTEM
- Corrosion resistant separate circuit aftercooler core, regular dutyair cleaners, dual turbochargers
-
CONTROL SYSTEM
- Caterpillar A-III electronic engine control, Electronic UnitInjection fuel system, rigid wiring harness
-
COOLING SYSTEM
- Auxiliary fresh water pump, centrifugal non-self-priming auxiliarysea water pump, gear driven centrifugal jacket water pump,expansion tank, engine oil cooler, thermostats and housing
-
EXHAUST SYSTEM
- Dry gas-tight exhaust manifolds with heat shields, dualturbochargers with water-cooled bearings and heat shields,vertical exhaust outlet
-
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel, SAE No. 00, 183 teethFlywheel housing, SAE No. 00
-
FUEL SYSTEM
- Fuel filter, RH, with service indicators
- Fuel transfer pump
- Electronically Controlled Unit Injectors
-
INSTRUMENTATION
- Engine mounted instrument panel with four position switch, overspeed shutdown notification light, emergency stop notificationlight, graphical display unit for analog or digital display of: oil andfuel pressure, oil and fuel filter differential, system DC voltage,exhaust and water temperature, air inlet restriction, servicemeter, engine speed, fuel consumption (total and instantaneous)
-
LUBE SYSTEM
- Top mounted crankcase breather, RH oil filter, RH oil filler,gear type oil pump, deep sump oil pan, recommended use ofCaterpillar Diesel Engine Oil 10W30 or 15W40
-
MOUNTING SYSTEM
- Industrial type engine mounting rails)
-
POWER TAKE-OFFS
- Accessory driveLower RH, Lower LHFront housing, Two-sided
-
PROTECTION SYSTEM
- A-III Electronic Monitoring System provides customer programmableengine de-ration strategies to protect against adverse operatingconditions
- Emergency stop push button (located in Electronic Instrument Panel)Safety shutoff protection for oil pressure and water temperature, overspeed protection
-
GENERAL
- Vibration damper and guardPaint, Caterpillar Yellow engine with black rails.Lifting eyes
-
AIR INLET SYSTEM
- Air Cleaner Removal
- Remote Air Inlet Adapters
-
CHARGING SYSTEM
- Battery Chargers
- Charging Alternators
-
CONTROL SYSTEM
- Load Sharing module
- Local speed throttle control
-
COOLING SYSTEM
- Water level switch gauge
- Coolant level sensors
- Connections
- Keel Cooling Conversions
- Radiator cooling conversion
- Heat exchangers
- Auxiliary water pumps
- Sea water pump removal
- Air separator
-
EXHAUST SYSTEM
- Exhaust outlet
- Flexible fittings
- Elbows
- Flanges
- Flange and exhaust expanders
- Mufflers
-
FUEL SYSTEM
- Fuel Cooler
- Fuel priming pumps
- Flexible fuel lines
- Rigid Fuel Lines
- Primary fuel filter
- Fuel level switch
-
GENERATORS AND GENERATOR ATTACHMENTS
- INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
- INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
-
INSTRUMENTATION
- PL1000T Communication Module
- PL1000E Communication Module
- Customer Interface Box
- Thermocouples
- Remote panel display
- Remote cylinder temperature display
-
LUBE SYSTEM
- Oil Pan
- Oil pan accessories
- Sump pumps
- Prelubrication Options
- Lubricating oil
- Centrifugal Oil Filter
-
MOUNTING SYSTEM
- Vibration isolators
- Rails
-
POWER TAKE-OFFS
- Flywheel guard
- Flexible coupling
- Coupling hub
- Front housing accessories
- Upper left hand front location
- Upper left hand rear location
- Upper right hand front location:
- Upper right hand rear location
- Lower left hand front location
- Front housing accessory drives
- Front power take-offs
- Crankshaft pulleys
- Damper guard removals
-
PROTECTION SYSTEM
- Air inlet shutoffs
- Switches and contactors
- Explosion relief valve
- Sensors
-
SPARE PART KITS
- Engine Parts Kits
-
STARTING SYSTEM
- Starting motors or barring divice
- Air starting motors options
- Starting aids
- Battery sets - 24 volt - Dry
- Battery rack
-
GENERAL
- Tool set
- Caterpillar datalink wire
-
SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
- Commissioning