Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Compact Track Loaders

285 XE Compact Track Loader

  • Gross Power
    121 hp
  • Bore
    4.7 in
  • Displacement
    220 in²
  • Net Power
    120 hp
Engine
Gross Power
121 hp
Bore
4.7 in
Displacement
220 in²
Net Power
120 hp
Net Power
121 hp
Peak Torque
406 lb/ft
Engine Model
Cat​​​​​​​® C3.6 TA (turbocharged after-cooled)
Note
Maximum Gross Power ISO 14396:2002 (at 2200 RPM) – with High Flow Attachment connected: 100 kW (134.1 hp)
Stroke
3.9 in
Hydraulic System
Hydraulic Flow
80.7 hp
Hydraulic Flow
34 gal/min
Hydraulic Flow
4061 psi
Hydraulic Flow
46.4 hp
Hydraulic Flow
23 gal/min
Hydraulic Flow
3500 psi
Hydraulic Flow
4496 klb/in²
Hydraulic Flow
40 gal/min
Hydraulic Flow
103.9 hp
Weights*
Operating Weight
13669 lb
Counterweight Adds to Operating Weight
428 lb
Counterweight Adds to Operating Weight
296 lb
Counterweight Adds to Operating Weight
847 lb
Note
*Operating Weight, Operating Specifications, and Dimensions are all based on 75 kg (165 lb) operator, all fluids, two speed, 2188 mm (86 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydra
Service Refill Capacities
Cooling System
4.6 gal (US)
Engine Crankcase
2.4 gal (US)
Fuel Tank
36 gal (US)
Hydraulic System
10.8 gal (US)
Hydraulic Tank
6.9 gal (US)
Diesel Exhaust Fluid
2.9 gal (US)
Operating Specifications
Rated Operating Capacities
4520 lb
Breakout Force
8730 lb
Breakout Force
13920 lb
Ground Contact Area
2724 in²
Ground Pressure
5 psi
Rated Operating Capacities
6457 lb
Tipping Load
12915 lb
Ground Pressure
5.6 psi
Dimensions
Bucket Pin Height
8.2 in
Bucket Pin Height
146.6 in
Bucket Pin Reach
16.3 in
Clearance at Maximum Lift and Dump
119.6 in
Departure Angle
26°
Ground Clearance
11 in
Height
87.8 in
Length
72 in
Length
157.4 in
Length
132.3 in
Maximum Overall Height
178 in
Maximum Reach
50.6 in
Overall Length
85.8 in
Rack Back Angle
89°
Reach at Maximum Lift
34.7 in
Roll Back Angle
27.2°
Turning Radius from Center
94.5 in
Turning Radius from Center
62.1 in
Turning Radius from Center
74.3 in
Vehicle Width
81.8 in
Maximum Dump Angle
40.5°
Cab
FOPS
ISO 3449:2005 Level I
ROPS
ISO 3471:2008
FOPS Level II
ISO 3449:2005 Level II (Optional)
Power Train
Travel Speed
4.8 mile/h
Travel Speed
7.7 mile/h
  • STANDARD EQUIPMENT
    • Quick Coupler: Manual or Hydraulic
    • High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
    • Steel Imbed Rubber Track – 400 mm (15.7 in) block tread, 450 mm (17.7 in) bar tread, 450 mm (17.7 in) block tread
    • Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange Front/Rear Idlers
  • PERFORMANCE PACKAGES
    • Performance Package HP5: XE Hydraulics
    • Performance Package HP6: XE Hydraulics, Rear Auxiliary Ready
  • COMFORT PACKAGES
    • Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
  • TECHNOLOGY PACKAGES
    • T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
    • T5 – T4 + 2 additional side view cameras.
  • RADIO
    • Radio, none – for open canopy machines and countries not certified for Bluetooth® technology
    • Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
    • Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
  • PRODUCT LINK™
    • Product Link™ Basic series PL243
    • Product Link Elite series PLE643
  • COOLING FAN
    • On-demand, variable speed hydraulic cooling fan
    • On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
  • GUARDING AND SEALING PACKAGES
    • HD1– intermediate guarding and sealing† (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding.) †Some equipment varies by region.
    • LM1 – intermediate level land management guarding and sealing† (HD1 + turbo guard, exhaust stack wrap, Diesel Particulate Filter (DPF)/ Emission component wraps, light guarding, quick disconnect guarding, hydraulic lines guard cover (under step), screw-to-connect auxiliary hydraulic couplings, and engine air inlet pre-cleaner.) †Some equipment varies by region.
    • LM2 – most comprehensive land management guarding and sealing† (HD1 + increased fuel capacity (220 L/58 gal), turbo guard, exhaust stack wrap, DPF/Emission component wraps, light guarding, quick disconnect guarding, hydraulic lines guard cover (under step), screw-to-connect auxiliary hydraulic couplings, and engine air inlet pre-cleaner.) †Some equipment varies by region.
  • ELECTRICAL
    • Work Tool Electrical Harness
    • Heavy duty battery
    • Battery disconnect with lockout feature
    • 12-volt Electrical System
    • 100 Ampere Alternator
    • LED Work Lights
    • Auto Reverse Lights
    • Switch Backlighting
    • Interior LED Dome Light
    • Backup Alarm
    • Electrical Outlet, Beacon
    • Exterior Courtesy Lighting
  • OPERATOR ENVIRONMENT
    • Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (× 32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
    • Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
    • Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, Battery Voltage, Tachometer
    • Fold In Ergonomic Contoured Armrest
    • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake engages
    • ROPS Cab, Tilt Up
    • FOPS, Level I
    • Top and Rear Windows
    • Floor Mat
    • Headliner
    • Interior Rearview Mirror
    • Horn
    • Hand (Dial) Throttle, Electronic
    • Seat Mounted Joystick Controls
    • Cell Phone Storage Pocket
    • Cup Holder
    • 12-volt power port
    • Foot Throttle
  • HYDRAULICS
    • Selectable control pattern – ISO or H
    • Electro/hydraulic implement control
    • Electro/hydraulic hydrostatic transmission control
    • Speed sensor guarding
    • Heavy duty flat faced quick disconnects with integrated pressure release lever and case drain
    • Hydraulic oil level sight gauge
  • POWER TRAIN
    • Cat C3.6TA turbocharged, after-cooled diesel engine, meeting Tier 4 Final and Stage V Emission Standards: Glow plugs starting aid Liquid cooled, direct injection
    • Extended life antifreeze (–37° C, –34° F)
    • Air cleaner, dual element, radial seal
    • Scheduled Oil Sampling (S·O·SSM) Valve, Hydraulic Oil
    • Ecology drain – coolant
    • Radiator coolant level sight gauge
    • Radiator expansion bottle
    • Filter, hydraulic supply, cartridge type
    • Filter, hydraulic return, cartridge type
    • Filter, canister type, engine oil
    • Filter, canister type, fuel and water separator
    • Radiator/hydraulic oil
    • Cooler (side-by-side)
    • Spring applied, hydraulically released, parking brakes
    • Hydrostatic transmission
    • Lockable fuel cap
    • Hydraulic demand cooling fan
    • Auto engine idle
  • UNDERCARRIAGE
    • E-bar (equalizer bar) suspension
    • Two speed travel
    • Integrated tie downs on track frame (4)
  • FRAME
    • Machine tie down points (9)
    • Removable panels for machine frame cleanout
    • Support, lift arm
    • Steel rear and front bumpers, welded
    • Fuel fill, machine right hand side
  • OTHER
    • Auxiliary Hydraulics, Continuous Flow
    • Telematics, Product Link, Cellular
    • Steel engine door with replaceable louvers
    • Engine door – lockable
    • Work tool attachment coupler
    • Cat ToughGuardTM hose
  • OPTIONAL EQUIPMENT
    • External Counterweights
    • Beacon, LED
    • Oil, Hydraulic, Cold Operation
    • 4-point machine lifting eyes
    • Paint, Custom
    • Speed Sensitive Ride Control
    • Bluetooth Key Security
    • Attachment Hose Guide
    • Corrosion Inhibitor Coating