New MH3250 Track Material Handler for Sale

MH3250 Track Material Handler

Engine Model

Cat C9.3B
Net Power

311 hp
Net Power

315 hp (metric)
Engine Power

314 hp

Engine

Engine Model: Cat C9.3B
Net Power: 311 hp
Net Power: 315 hp (metric)
Engine Power: 314 hp
Engine Power: 318 hp (metric)
Bore: 5 in
Stroke: 6 in
Displacement: 568 in³
Biodiesel Capability: Up to B20¹
Emissions: Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note: Net power advertised is the power available at the flywheel when engine is equipped with fan, air cleaner, exhaust gas aftertreatment, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the ti
Note: ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Transmission

Maximum Travel Speed: 2.1 mile/h
Maximum Drawbar Pull: 55281 lbf
Gradeability: 35°/70%

Hydraulic System

Maximum Pressure: 5076 psi
Maximum Pressure: 4061 psi
Maximum Pressure: 5076 psi

Swing Mechanism

Swing Speed: 8 r/min
Swing Torque: 104734 lbf·ft

Weights

Operating Weight: 107700 lb

Service Refill Capacities

Fuel Tank Capacity: 158.5 gal (US)
Cooling System: 10.6 gal (US)
Engine Oil: 8.5 gal (US)
Final Drive: 4 gal (US)
Hydraulic System: 98.5 gal (US)
Hydraulic Tank: 42.5 gal (US)
DEF Tank: 21.1 gal (US)

Dimensions

Boom: MH 9.2 m (30'2")
Stick: Industrial 7.6 m (24'11")
Cab Height: 11.5 ft
Cab Height: 11.7 ft
Cab Height: 19.8 ft
Cab Height: 20.2 ft
Shipping Length: 41.7 ft
Machine Length: 41.4 ft
Upper Frame Width: 12.5 ft
Tail Swing Radius: 11.6 ft
Counterweight Clearance: 4.6 ft
Ground Clearance: 2.3 ft
Track Length to Center of Rollers: 14.2 ft
Track Length: 17.6 ft
Track Gauge: 10.6 ft
Track Gauge: 12.2 ft
Undercarriage Width: 13.2 ft
Undercarriage Width: 14.8 ft

Working Ranges

Maximum Reach: 52.5 ft
Boom: MH 9.2 m (30'2")
Stick: Industrial 7.6 m (24'11")
Maximum Height: 55.3 ft
Minimum Swing Radius: 12.7 ft
Maximum Depth: 23.3 ft
Boom Pin Height: 37.6 ft

Air Conditioning System

Note: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg (2.64 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.892 tons).

Sustainability

Recyclability: 97%

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 9.2 m (30'2") Material Handler boom
CAB
- Advanced sound-suppressed with rubber mount
- High-resolution 254 mm (10") LCD touchscreen monitor
- Air suspension premium seat with headrest, heater, ventilator
- Operator Protective Guards (OPG)
CAT TECHNOLOGY
- VisionLink^®
- Remote Flash and Remote Troubleshoot
ELECTRICAL SYSTEM
- Maintenance-free battery
- LED exterior lights (integrated into storage box and mounted on boom and stick sides)
- Centralized electrical disconnect switch
- Power fuse module
ENGINE
- 115 amp alternator
- Cold start capability -32°C (-25°F)
- 52°C (126°F) high-ambient cooling capability
- Automatic engine speed control
- Electric fuel priming pump
- Double element air filter with integrated pre-cleaner
- Single plane three horizontal cooling system
HYDRAULIC SYSTEM
- Electronic main control valve
- Automatic warm up and cold lock out
- Automatic swing parking brake
- Hydraulic main pump
- Boom and stick lowering check valves
- Boom and stick regeneration circuit
- Medium pressure (grapple rotate) and cab riser valve
- Reverse swing damping valve
- High performance hydraulic return filter
- Two speed travel
- Fine swing capability (N Am only)
SAFETY AND SECURITY
- Right-hand handrail and hand hold
- Signaling/warning horn
- Secondary engine shutoff switch
- Rear and right-side-view cameras
- Cab avoidance
- 2D E-fence
- Swing Assist
- Lockable external tool/storage box and fuel drain compartment
- Lockable disconnect switch
SERVICE AND MAINTENANCE
- Service platform with anti-skid plate and recessed bolts
- Scheduled Oil Sampling (S·O·S℠) ports
- Grouped location for engine oil and fuel filters
- Integrated vehicle health management system
UNDERCARRIAGE AND STRUCTURES
- 6800 kg (14,990 lb) counterweight

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 6.1 m (20'0") Industrial stick
- 7.6 m (24'11") Industrial stick
ELECTRICAL SYSTEM
- Generator, 25 kW with wiring to stick nose
SAFETY AND SECURITY
- Inspection lighting
- 360° visibility
- Swing alarm