Material Handlers
MH3260 Track Material Handler
Engine
- Engine Model
- Cat C13
- Net Power
- 424 hp
- Net Power
- 430 hp (metric)
- Engine Power
- 425 hp
- Engine Power
- 431 hp (metric)
- Bore
- 5 in
- Stroke
- 6 in
- Displacement
- 763 in³
- Biodiesel Capability
- Up to B20¹
- Emissions
- Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Note
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, exhaust gas aftertreatment and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the
- Note
- ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Transmission
- Maximum Travel Speed
- 3 mile/h
- Maximum Drawbar Pull
- 53729 lbf
- Gradeability
- 30°/58%
Hydraulic System
- Maximum Pressure
- 5076 psi
- Maximum Pressure
- 3771 psi
- Maximum Pressure
- 5076 psi
Swing Mechanism
- Swing Speed
- 8 r/min
- Swing Torque
- 137924 lbf·ft
Weights
- Operating Weight
- 133200 lb
Service Refill Capacities
- Fuel Tank Capacity
- 188.9 gal (US)
- Cooling System
- 13.7 gal (US)
- Engine Oil
- 10.6 gal (US)
- Final Drive
- 4 gal (US)
- Hydraulic System
- 145.3 gal (US)
- Hydraulic Tank
- 57.3 gal (US)
- DEF Tank
- 12.2 gal (US)
Dimensions
- Boom
- MH 9.9 m (32'6")
- Stick
- Industrial 9.1 m (29'10")
- Cab Height
- 11.6 ft
- Cab Height
- 11.7 ft
- Cab Height
- 19.8 ft
- Cab Height
- 20.3 ft
- Shipping Length
- 45 ft
- Machine Length
- 43.5 ft
- Upper Frame Width
- 12.6 ft
- Tail Swing Radius
- 12.3 ft
- Counterweight Clearance
- 4.7 ft
- Ground Clearance
- 2.3 ft
- Track Length to Center of Rollers
- 14.2 ft
- Track Length
- 17.6 ft
- Track Gauge
- 10.6 ft
- Track Gauge
- 12.2 ft
- Undercarriage Width
- 13.2 ft
- Undercarriage Width
- 14.8 ft
Working Ranges
- Maximum Reach
- 59.1 ft
- Boom
- MH 9.9 m (32'6")
- Stick
- Industrial 9.1 m (29'10")
- Maximum Height
- 58.5 ft
- Minimum Swing Radius
- 13.1 ft
- Maximum Depth
- 26.7 ft
- Boom Pin Height
- 39.8 ft
Air Conditioning System
- Note
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg (2.86 lb) of refrigerant which has a CO₂ equivalent of 1.859 metric tonnes (2.049 tons).
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
BOOMS AND STICKS
- 9.9 m (32'6") Material Handler boom
-
CAB
- Advanced sound-suppressed with rubber mount
- High-resolution 254 mm (10") LCD touchscreen monitor
- Air suspension premium seat with headrest, heater, ventilator
- Operator Protective Guards (OPG)
-
CAT TECHNOLOGY
- VisionLink®
- Remote Flash and Remote Troubleshoot
-
ELECTRICAL SYSTEM
- Maintenance-free battery
- LED exterior lights (integrated into storage box and mounted on boom and stick sides)
- Centralized electrical disconnect switch
- Power fuse module
-
ENGINE
- 115 Amp alternator
- Cold start capability -32°C (-25°F)
- 52°C (126°F) high-ambient cooling capability
- Automatic engine speed control
- Electric fuel priming pump
- Double element air filter with integrated pre-cleaner
- Single plane three horizontal cooling system
-
HYDRAULIC SYSTEM
- Electronic main control valve
- Automatic warm up and cold lock out
- Automatic swing parking brake
- Boom and stick lowering check valves
- Boom and stick regeneration circuit
- Medium pressure (grapple rotate) and cab riser valve
- Reverse swing damping valve
- High performance hydraulic return filter
- Two speed travel
- Fine swing capability (N Am only)
-
SAFETY AND SECURITY
- Right-hand handrail and hand hold
- Signaling/warning horn
- Secondary engine shutoff switch
- Rear and side-view cameras
- Cab avoidance
- 2D E-fence
- Swing Assist
- Lockable external tool/storage box and fuel drain compartment
- Lockable disconnect switch
-
SERVICE AND MAINTENANCE
- Service platform with anti-skid plate and recessed bolts
- Scheduled Oil Sampling (S·O·S℠) ports
- Grouped location for engine oil and fuel filters
- Integrated vehicle health management system
-
UNDERCARRIAGE AND STRUCTURES
- 12000 kg (26,460 lb) counterweight
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
BOOMS AND STICKS
- 7.4 m (24'5") Industrial stick
- 9.1 m (29'10") Industrial stick
-
ELECTRICAL SYSTEM
- Generator, 25 kW with wiring to stick nose
-
SAFETY AND SECURITY
- Inspection lighting
- 360° visibility
- Swing alarm
-
Browse All Used Equipment Inventory
View More