Cat C4.4 Diesel Engine

masthead-innerpage-bg
Exterior View

Cat C4.4 Diesel Engine

Maximum Power200 hp
Maximum Torque609 lb-ft @ 1400 rpm
Rated Speed2200 rpm
Minimum Power109 hp
product-tabs-bg

Learn more about our Cat C4.4 Diesel Engine

Cat® C4.4 Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of common rail fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by C4.4 engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Maximum Power
200hp
Maximum Torque
609lb-ft @ 1400 rpm
Rated Speed
2200 rpm
Minimum Power
109hp
Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V
Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
4.1in
Stroke
5in
Displacement
268.5in³
Compression Ratio
16.5:1
Aspiration
Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR
Length
32.4in
Width
29.6in
Height
35.3in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
1180lb
Length
26.5in
Width
24.5in
Height
17.8in
Weight
143.3lb
Standard air cleaners
Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
50:50 water glycol mix
Fitted with SAE3 configuration as standard
Electronic high pressure common rail
Innovative filter design to ensure maximum protection of the engine
Wide choice of sumps for different applications
SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
Available with or without a balancer
Paint: Caterpillar yellow, with optional colors available at request
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Selective Catalytic Reduction (SCR)
3" flex pipe connection with straight, 45°, and 90° options for flexibility
TO TOP