Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Careers
Careers
Careers
On Highway Specials 20262026 RSVPSnow Blowers

275 XE Compact Track Loader
Exterior View
Interior View

275 XE Compact Track Loader

Gross Power – SAE J1995:2014122 hp
Bore3.9 in
Displacement221 in²
Net Power – ISO 9249120 hp
product-tabs-bg

Learn more about our 275 XE Compact Track Loader

The Cat® 275 XE Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard equalizer bar (E-bar) undercarriage system and two speed travel provides superior traction, flotation, stability, and speed to work in a wide range of applications and underfoot conditions.

Gross Power - SAE J1995:2014
122hp
Bore
3.9in
Displacement
221in²
Net Power - ISO 9249
120hp
Net Power - SAE 1349
82hp
Peak Torque at 1,360 rpm SAE J1995
370lb/ft
Peak Torque - 1,500 rpm - SAE J1995
406lb/ft
Stroke
4.7in
Engine Model
® C3.6 TA (turbocharged after-cooled)" data-metric=""> Cat® C3.6 TA (turbocharged after-cooled)
Rated Operating Capacities - 35% Tipping Load
4205lb
Breakout Force - Lift Cylinder
6422lb
Breakout Force - Tilt Cylinder
9963lb
Ground Contact Area - With 450 mm/17.7 in Track
2808in²
Ground Pressure - With 450 mm/17.7 in Track
4.5psi
Rated Operating Capacities - 50% Tipping Load
4033lb
Rated Operating Capacity with Optional Counterweight
2996lb
Tipping Load
12015lb
Operating Weight
12705lb
Counterweight Adds to Operating Weight
428lb
Counterweight Adds to Operating Weight - ROC (35%)
279lb
Counterweight Adds to Operating Weight - Tip Load
796lb
Enclosed Cab Adds to Operating Weight
218lb
Enclosed Cab Adds to Operating Weight - ROC (35%)
105lb
Enclosed Cab Adds to Operating Weight - Tip Load
214lb
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed (variable), 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idler, XE (H6) hydraulics with rear a
Bucket Pin Height - Carry Position
8.1in
Bucket Pin Height - Maximum Lift
134.4in
Bucket Pin Reach - Maximum Lift
16.3in
Clearance at Maximum Lift and Dump
106.1in
Departure Angle
29.5°
Ground Clearance
11in
Height - Top of Cab
87.8in
Length - Track on Ground
72.3in
Length - With Bucket on Ground
152.8in
Length - Without Bucket
128in
Maximum Overall Height
165.1in
Maximum Reach - With Arms Parallel to Ground
46.1in
Overall Length - Track
92.2in
Rack Back Angle - Maximum Height
86.7°
Reach at Maximum Lift/Dump
32in
Roll Back Angle
27.3°
Turning Radius from Center - Bucket (racked)
91.3in
Turning Radius from Center - Coupler
60.3in
Turning Radius from Center - Machine Rear
76in
Vehicle Width (450 mm/17.7 in tracks)
77.8in
Maximum Dump Angle
44.7°
FOPS
ISO 3449:2005 Level I
ROPS
ISO 3471:2008
FOPS Level II
ISO 3449:2005 Level II (Optional)
Cooling System
4.6gal (US)
Engine Crankcase
2.4gal (US)
Fuel Tank
36.9gal (US)
Hydraulic System
10.8gal (US)
Hydraulic Tank
6.9gal (US)
Diesel Exhaust Fluid (DEF) Tank
2.9gal (US)
Travel Speed - Forward or Reverse - One Speed
5.2mile/h
Travel Speed - Forward or Reverse - Two Speed
7.8mile/h
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
4496psi
Hydraulic Flow - High Flow - Loader Hydraulic Flow
34gpm
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
40gpm
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
3500psi
Hydraulic Flow - XE - Hydraulic Power (calculated)
103.9hp
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
80.7hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
23gpm
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
4061psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
46.4hp
Hydraulic Flow - Standard - Loader Hydraulic Flow
23gpm
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3500psi
Vehicle Width (400 mm/15.7 in tracks)
75.8in
Quick Coupler: Manual or Hydraulic
High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
Steel Imbed Rubber Track – 450 mm (17.7 in) bar tread, 450 mm (17.7 in) block tread
Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange Front/Rear Idlers
Performance Package HP1: Standard Flow Hydraulics
Performance Package HP3: High Flow XPS Hydraulics
Open canopy: Cup Holder, Cell Phone Pocket, choice of vinyl Seat (Mechanical Suspension, High Back/Heated/Air Ride Seat)
Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
T2 – Standard Display, Standard Joysticks, traditional Key Start switch, and Rear-view camera.
T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
T5 – T4 + 2 additional side view cameras.
Radio, none – for open canopy machines and countries not certified for Bluetooth® technology
Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
Product Link™ Basic series PL243
Product Link Elite series PLE643
On-demand, variable speed hydraulic cooling fan
On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
HD0 – base guarding and sealing (engine air inlet rain cap, front cab to-frame sealing, and hydraulic fill access door)
HD1– intermediate guarding and sealing† (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding.) †Some equipment varies by region.
HD2 – most comprehensive guarding and sealing† (HD1 + turbo guard, exhaust stack wrap, DPF wrap, quick disconnect guarding, fully enclosed drive line guarding, under step hydraulic lines guard cover, engine air inlet pre-cleaner.)
Work Tool Electrical Harness
Heavy duty battery
Battery disconnect with lockout feature
12-volt Electrical System
85 Ampere Alternator
LED Work Lights
Auto Reverse Lights
Switch Backlighting
Interior LED Dome Light
Backup Alarm
Electrical Outlet, Beacon
Exterior Courtesy Lighting
Automatic Work light notification flash when parking brake is released
Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (× 32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, Battery Voltage, Tachometer
Fold In Ergonomic Contoured Armrest
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking
Brake Engages
ROPS Cab, Tilt Up
FOPS, Level I
Top and Rear Windows
Floor Mat
Headliner
Interior Rearview Mirror
Horn
Hand (Dial) Throttle, Electronic
Seat Mounted Joystick Controls
Cell Phone Storage Pocket
Cup Holder
12-volt power port
Foot Throttle
Selectable control pattern – ISO or H
Electro/hydraulic implement control
Electro/hydraulic hydrostatic transmission control
Speed sensor guarding
Heavy duty flat faced quick disconnects with integrated pressure release lever
Hydraulic oil level sight gauge
Cat C3.6TA turbocharged, after-cooled diesel engine, meeting U.S. EPA Tier 4 Final and EU Stage V Emission Standards: Glow plugs starting aid Liquid cooled, direct injection
Extended life antifreeze (–37° C, –34° F)
Air cleaner, dual element, radial seal
Scheduled Oil Sampling (S·O·SSM) Valve, Hydraulic Oil
Ecology drain – coolant
Radiator coolant level sight gauge
Radiator expansion bottle
Filter, hydraulic supply, cartridge type
Filter, hydraulic return, cartridge type
Filter, canister type, engine oil
Filter, canister type, fuel and water separator
Radiator/hydraulic oil
Cooler (side-by-side)
Spring applied, hydraulically released, parking brakes
Hydrostatic transmission
Lockable fuel cap
Hydraulic demand cooling fan
Auto engine idle
Torsion Suspension (4 independent torsion axles)
Two speed travel
Integrated tie downs on track frame (4)
Machine tie down points (9)
Removable panels for machine frame cleanout
Support, lift arm
Steel rear and front bumpers, welded
Fuel fill, machine right hand side
Auxiliary Hydraulics, Continuous Flow
Telematics, Product Link, Cellular
Steel engine door with replaceable louvers
Engine door – lockable
Work tool attachment coupler
Cat ToughGuardTM hose
External Counterweights
Beacon, LED
Engine Block Heater – 120V
Oil, Hydraulic, Cold Operation
4-point machine lifting eyes
Paint, Custom
Speed Sensitive Ride Control
Bluetooth Key Security
Attachment Hose Guide
Corrosion Inhibitor Coating

T315 High Flow Trencher With Combo Teeth Chain

T315 High Flow Trencher With No Chain

T315 High Flow Trencher With Standard Teeth Chain

T112 Manual Trencher With Standard Teeth Chain

T112 Manual Trencher With Rock-Frost Teeth

T315 High Flow Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With Standard Teeth Chain

T112 Manual Trencher With Combo Teeth Chain

T112 Manual Trencher With No Chain

T112 Hydraulic Trencher With Combo Teeth Chain

T112 Hydraulic Trencher With No Chain

T112 Hydraulic Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With Rock-Frost Teeth

T109 Manual Trencher With No Chain

T109 Manual Trencher With Standard Teeth Chain

T109 Manual Trencher With Standard Teeth Chain

T109 Manual Trencher With Rock-Frost Teeth

T109 Manual Trencher With Terminator Teeth Chain

T109 Manual Trencher With Combo Teeth Chain

T109 Hydraulic Trencher With No Chain

T109 Hydraulic Trencher With Standard Teeth Chain

T109 Hydraulic Trencher With Rock-Frost Teeth

T109 Hydraulic Trencher With Standard Teeth Chain

LT118 Landscape Tiller

LT114 Landscape Tiller

T109 Hydraulic Trencher With Combo Teeth Chain

T109 Hydraulic Trencher With Terminator Teeth Chain

SG36 Stump Grinder

3.05 m (10 ft) IT Coupler Straight Snow Push With Rubber Trip Edge

SR318 Snow Blower

SR121 Snow Blower

S308 Mobile Scrap & Demolition Shear

LR119 Landscape Rake

LR116 Landscape Rake

0.76 m3 (1.0 yd3) Mulch Bucket with bolt-on cutting edge

HM418 High Flow XHP Hydraulics Mulcher

HM416 High Flow XHP Hydraulics Mulcher

HM316 High Flow XPS Hydraulics Mulcher

HM115 Standard Flow Mulcher

Skid Steer Coupler Material Handling Arm For Compact Products

1829 mm (72 in) Utility Grapple Forks

1676 mm (66 in) Utility Grapple Forks

1829 mm (72 in) Utility Forks

1676 mm (66 in) Utility Forks

1829 mm (72 in) Industrial Grapple Forks

1676 mm (66 in) Industrial Grapple Forks

CV119 Vibratory Drum Compactor

CV117 Vibratory Drum Compactor

1730 mm (68 in) Utility Grapple Bucket

1883 mm (74 in) Utility Grapple Bucket

1883 mm (74 in) Utility Bucket With Bolt-On Cutting Edge

1730 mm (68 in) Utility Bucket With Bolt-On Cutting Edge

1576 mm (62 in) Utility Bucket With Bolt-On Cutting Edge

2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard

2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard

2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard

2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard

2185 mm (86 in) Material Handling Bucket With Bolt-On Cutting Edge

2490 mm (98 in) Material Handling Bucket With Bolt-On Cutting Edge

2642 mm (104 in) Material Handling Bucket With Bolt-On Cutting Edge

MB200 Mixing Bucket

MB250 Mixing Bucket

2490 mm (98 in) Light Material Bucket With Bolt-On Cutting Edge

1883 mm (74 in) Light Material Bucket With Bolt-On Cutting Edge

2036 mm (80 in) Light Material Bucket With Bolt-On Cutting Edge

2185 mm (86 in) Light Material Bucket With Bolt-On Cutting Edge

BP118C Pickup Broom

BP115C Pickup Broom

GB124 Grader Blade

2337 mm (92 in) Dozer Blade with Smart Technology

2337 mm (92 in) Dozer Blade

2007 mm (79 in) Dozer Blade

2134 mm (84 in) Angle Blade

BB124 Box Blade

BB121 Box Blade

1829 mm (72 in) Angle Blade

1140 mm (45 in) Dual Tine Bale Spear

1140 mm (45 in) Single Tine Bale Spear

890 mm (35 in) Dual Tine Bale Spear

890 mm (35 in) Single Tine Bale Spear

A68 Auger For Skid Steer Couplers

A41 Auger For Skid Steer Couplers

A23 Auger For Skid Steer Couplers

SR321 Snow Blower

SR118 Snow Blower

1586 mm (62 in), 0.34 m3 (0.44 yd3) Low Profile Bucket With Bolt-On Cutting Edge

1740 mm (68 in), 0.37 m3 (0.48 yd3) Low Profile Bucket With Bolt-On Cutting Edge

1893 mm (74 in), 0.41 m3 (0.54 yd3) Low Profile Bucket With Bolt-On Cutting Edge

2036 mm (80 in) Low Profile Bucket With Bolt-On Cutting Edge

1421 mm (56 in) Low Profile Bucket With Bolt-On Cutting Edge
GET in touch today

    TO TOP