Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Careers
Careers
Careers
982M Certified Machine RebuildPaperless InvoicingArticulated Truck Bare Chassis

285 XE Compact Track Loader
Exterior View
Interior View

285 XE Compact Track Loader

Gross Power – SAE J1995:2014121 hp
Bore4.7 in
Displacement220 in²
Net Power – ISO 9249120 hp
product-tabs-bg

Learn more about our 285 XE Compact Track Loader

The Cat® 285 XE Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard equalizer bar (E-bar) undercarriage system and two speed travel provides superior traction, flotation, stability, and speed to work in a wide range of applications and underfoot conditions.

Gross Power - SAE J1995:2014
121hp
Bore
4.7in
Displacement
220in²
Net Power - ISO 9249
120hp
Net Power - SAE 1349
121hp
Peak Torque - 1,500 rpm - SAE J1995
406lb/ft
Stroke
3.9in
Engine Model
® C3.6 TA (turbocharged after-cooled)" data-metric=""> Cat​​​​​​​® C3.6 TA (turbocharged after-cooled)
Note
Maximum Gross Power ISO 14396:2002 (at 2200 RPM) – with High Flow Attachment connected: 100 kW (134.1 hp)
Rated Operating Capacities - 35% Tipping Load
4520lb
Breakout Force - Lift Cylinder
8730lb
Breakout Force - Tilt Cylinder
13920lb
Ground Contact Area - With 450 mm/17.7 in Track
2724in²
Ground Pressure - With 450 mm/17.7 in Track
5psi
Rated Operating Capacities - 50% Tipping Load
6457lb
Tipping Load
12915lb
Ground Pressure - With 400 mm/15.7 in Track
5.6psi
Operating Weight
13669lb
Counterweight Adds to Operating Weight
428lb
Counterweight Adds to Operating Weight - ROC (35%)
296lb
Counterweight Adds to Operating Weight - Tip Load
847lb
Note
*Operating Weight, Operating Specifications, and Dimensions are all based on 75 kg (165 lb) operator, all fluids, two speed, 2188 mm (86 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydra
Bucket Pin Height - Carry Position
8.2in
Bucket Pin Height - Maximum Lift
146.6in
Bucket Pin Reach - Maximum Lift
16.3in
Clearance at Maximum Lift and Dump
119.6in
Departure Angle
26°
Ground Clearance
11in
Height - Top of Cab
87.8in
Length - Track on Ground
72in
Length - With Bucket on Ground
157.4in
Length - Without Bucket
132.3in
Maximum Overall Height
178in
Maximum Reach - With Arms Parallel to Ground
50.6in
Overall Length - Track
85.8in
Rack Back Angle - Maximum Height
89°
Reach at Maximum Lift/Dump
34.7in
Roll Back Angle
27.2°
Turning Radius from Center - Bucket (racked)
94.5in
Turning Radius from Center - Coupler
62.1in
Turning Radius from Center - Machine Rear
74.3in
Vehicle Width (450 mm/17.7 in tracks)
81.8in
Maximum Dump Angle
40.5°
FOPS
ISO 3449:2005 Level I
ROPS
ISO 3471:2008
FOPS Level II
ISO 3449:2005 Level II (Optional)
Cooling System
4.6gal (US)
Engine Crankcase
2.4gal (US)
Fuel Tank
36gal (US)
Hydraulic System
10.8gal (US)
Hydraulic Tank
6.9gal (US)
Diesel Exhaust Fluid (DEF) Tank
2.9gal (US)
Travel Speed - Forward or Reverse - One Speed
4.8mile/h
Travel Speed - Forward or Reverse - Two Speed
7.7mile/h
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
80.7hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
34gpm
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
4061psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
46.4hp
Hydraulic Flow - Standard - Loader Hydraulic Flow
23gpm
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3500psi
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
4496klb/in²
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
40gpm
Hydraulic Flow - XE - Hydraulic Power (calculated)
103.9hp
Quick Coupler: Manual or Hydraulic
High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
Steel Imbed Rubber Track – 400 mm (15.7 in) block tread, 450 mm (17.7 in) bar tread, 450 mm (17.7 in) block tread
Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange Front/Rear Idlers
Performance Package HP5: XE Hydraulics
Performance Package HP6: XE Hydraulics, Rear Auxiliary Ready
Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
T5 – T4 + 2 additional side view cameras.
Radio, none – for open canopy machines and countries not certified for Bluetooth® technology
Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
Product Link™ Basic series PL243
Product Link Elite series PLE643
On-demand, variable speed hydraulic cooling fan
On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
HD1– intermediate guarding and sealing† (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding.) †Some equipment varies by region.
LM1 – intermediate level land management guarding and sealing† (HD1 + turbo guard, exhaust stack wrap, Diesel Particulate Filter (DPF)/ Emission component wraps, light guarding, quick disconnect guarding, hydraulic lines guard cover (under step), screw-to-connect auxiliary hydraulic couplings, and engine air inlet pre-cleaner.) †Some equipment varies by region.
LM2 – most comprehensive land management guarding and sealing† (HD1 + increased fuel capacity (220 L/58 gal), turbo guard, exhaust stack wrap, DPF/Emission component wraps, light guarding, quick disconnect guarding, hydraulic lines guard cover (under step), screw-to-connect auxiliary hydraulic couplings, and engine air inlet pre-cleaner.) †Some equipment varies by region.
Work Tool Electrical Harness
Heavy duty battery
Battery disconnect with lockout feature
12-volt Electrical System
100 Ampere Alternator
LED Work Lights
Auto Reverse Lights
Switch Backlighting
Interior LED Dome Light
Backup Alarm
Electrical Outlet, Beacon
Exterior Courtesy Lighting
Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (× 32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, Battery Voltage, Tachometer
Fold In Ergonomic Contoured Armrest
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake engages
ROPS Cab, Tilt Up
FOPS, Level I
Top and Rear Windows
Floor Mat
Headliner
Interior Rearview Mirror
Horn
Hand (Dial) Throttle, Electronic
Seat Mounted Joystick Controls
Cell Phone Storage Pocket
Cup Holder
12-volt power port
Foot Throttle
Selectable control pattern – ISO or H
Electro/hydraulic implement control
Electro/hydraulic hydrostatic transmission control
Speed sensor guarding
Heavy duty flat faced quick disconnects with integrated pressure release lever and case drain
Hydraulic oil level sight gauge
Cat C3.6TA turbocharged, after-cooled diesel engine, meeting Tier 4 Final and Stage V Emission Standards: Glow plugs starting aid Liquid cooled, direct injection
Extended life antifreeze (–37° C, –34° F)
Air cleaner, dual element, radial seal
Scheduled Oil Sampling (S·O·SSM) Valve, Hydraulic Oil
Ecology drain – coolant
Radiator coolant level sight gauge
Radiator expansion bottle
Filter, hydraulic supply, cartridge type
Filter, hydraulic return, cartridge type
Filter, canister type, engine oil
Filter, canister type, fuel and water separator
Radiator/hydraulic oil
Cooler (side-by-side)
Spring applied, hydraulically released, parking brakes
Hydrostatic transmission
Lockable fuel cap
Hydraulic demand cooling fan
Auto engine idle
E-bar (equalizer bar) suspension
Two speed travel
Integrated tie downs on track frame (4)
Machine tie down points (9)
Removable panels for machine frame cleanout
Support, lift arm
Steel rear and front bumpers, welded
Fuel fill, machine right hand side
Auxiliary Hydraulics, Continuous Flow
Telematics, Product Link, Cellular
Steel engine door with replaceable louvers
Engine door – lockable
Work tool attachment coupler
Cat ToughGuardTM hose
External Counterweights
Beacon, LED
Oil, Hydraulic, Cold Operation
4-point machine lifting eyes
Paint, Custom
Speed Sensitive Ride Control
Bluetooth Key Security
Attachment Hose Guide
Corrosion Inhibitor Coating

T315 High Flow Trencher With Combo Teeth Chain

T315 High Flow Trencher With No Chain

T315 High Flow Trencher With Standard Teeth Chain

T315 High Flow Trencher With Standard Teeth Chain

T112 Manual Trencher With No Chain

T112 Manual Trencher With Combo Teeth Chain

T112 Manual Trencher With Standard Teeth Chain

T112 Manual Trencher With Rock-Frost Teeth

T112 Hydraulic Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With No Chain

T112 Hydraulic Trencher With Combo Teeth Chain

T109 Manual Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With Rock-Frost Teeth

T112 Hydraulic Trencher With Standard Teeth Chain

T109 Manual Trencher With No Chain

T109 Manual Trencher With Combo Teeth Chain

T109 Hydraulic Trencher With Standard Teeth Chain

T109 Manual Trencher With Standard Teeth Chain

T109 Manual Trencher With Terminator Teeth Chain

T109 Manual Trencher With Rock-Frost Teeth

T109 Hydraulic Trencher With Rock-Frost Teeth

T109 Hydraulic Trencher With Standard Teeth Chain

T109 Hydraulic Trencher With No Chain

LT114 Landscape Tiller

T109 Hydraulic Trencher With Combo Teeth Chain

T109 Hydraulic Trencher With Terminator Teeth Chain

LT118 Landscape Tiller

SG36 Stump Grinder

3.05 m (10 ft) IT Coupler Straight Snow Push With Rubber Trip Edge

SR318 Snow Blower

SR121 Snow Blower

S308 Mobile Scrap & Demolition Shear

LR119 Landscape Rake

LR116 Landscape Rake

HM416 High Flow XHP Hydraulics Mulcher

HM418 High Flow XHP Hydraulics Mulcher

HM316 High Flow XPS Hydraulics Mulcher

HM115 Standard Flow Mulcher

Skid Steer Coupler Material Handling Arm For Compact Products

1829 mm (72 in) Utility Grapple Forks

1676 mm (66 in) Utility Grapple Forks

1829 mm (72 in) Utility Forks

1676 mm (66 in) Utility Forks

1676 mm (66 in) Industrial Grapple Forks

1829 mm (72 in) Industrial Grapple Forks

CV119 Vibratory Drum Compactor

CV117 Vibratory Drum Compactor

1883 mm (74 in) Utility Grapple Bucket

1730 mm (68 in) Utility Grapple Bucket

1576 mm (62 in) Utility Bucket With Bolt-On Cutting Edge

1730 mm (68 in) Utility Bucket With Bolt-On Cutting Edge

1883 mm (74 in) Utility Bucket With Bolt-On Cutting Edge

2490 mm (98 in) Material Handling Bucket With Bolt-On Cutting Edge

2642 mm (104 in) Material Handling Bucket With Bolt-On Cutting Edge

MB200 Mixing Bucket

MB250 Mixing Bucket

2185 mm (86 in) Material Handling Bucket With Bolt-On Cutting Edge

2036 mm (80 in) Light Material Bucket With Bolt-On Cutting Edge

2185 mm (86 in) Light Material Bucket With Bolt-On Cutting Edge

2490 mm (98 in) Light Material Bucket With Bolt-On Cutting Edge

1883 mm (74 in) Light Material Bucket With Bolt-On Cutting Edge

BP118C Pickup Broom

BP115C Pickup Broom

2134 mm (84 in) Angle Blade

BB121 Box Blade

1829 mm (72 in) Angle Blade

BB124 Box Blade

890 mm (35 in) Single Tine Bale Spear

890 mm (35 in) Dual Tine Bale Spear

1140 mm (45 in) Dual Tine Bale Spear

1140 mm (45 in) Single Tine Bale Spear

A68 Auger For Skid Steer Couplers

A41 Auger For Skid Steer Couplers

A23 Auger For Skid Steer Couplers

SR321 Snow Blower

SR118 Snow Blower

1586 mm (62 in), 0.34 m3 (0.44 yd3) Low Profile Bucket With Bolt-On Cutting Edge

1893 mm (74 in), 0.41 m3 (0.54 yd3) Low Profile Bucket With Bolt-On Cutting Edge

1740 mm (68 in), 0.37 m3 (0.48 yd3) Low Profile Bucket With Bolt-On Cutting Edge

2036 mm (80 in) Low Profile Bucket With Bolt-On Cutting Edge

1421 mm (56 in) Low Profile Bucket With Bolt-On Cutting Edge
GET in touch today

    TO TOP