Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Careers
Careers
Careers
982M Certified Machine RebuildPaperless Invoicing

950 GC Wheel Loader | Front Loader
Exterior View
Interior View
tracking-sharks-photo

950 GC Wheel Loader | Front Loader

Net Power – ISO 9249225 hp
EmissionsTier 4/Stage V
Displacement428 in³
Maximum Net Power – 1,700 rpm – ISO 9249 – Metric228 hp
product-tabs-bg

Learn more about our 950 GC Wheel Loader | Front Loader

The purpose-built, easy to operate, reliable Cat 950 GC wheel loader is right-sized to get your everyday jobs done. With low fuel consumption, low owning and operating costs, the 950 GC is the perfect wheel loader to handle your loose material handling, truck loading, general construction, and stockpiling jobs.

Net Power - ISO 9249
225hp
Emissions
Tier 4/Stage V
Displacement
428in³
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric
228hp
Maximum Power - 1,700 rpm - ISO 14396
240hp
Maximum Power - 1,700 rpm - ISO 14396 - Metric
243hp
Peak Gross Torque - 1,400 rpm - SAE J1995
811ft·lbf
Peak Gross Torque - 1,400 rpm - ISO 14396
805ft·lbf
Engine Model
Cat C7.1
Maximum Net Power - 1,700 rpm - ISO 9249
225hp
Maximum Net Power - 1,700 rpm - SAE J1349
225hp
Maximum Power - 1,700 rpm - SAE J1995
241hp
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
Bore
4.13in
Stroke
5.31in
Operating Weight
41554lb
Bucket Capacities
2.9-4.4 m³ (3.75-5.75 yd³)
Reverse - 3
14.2mile/h
Forward - 3
14.2mile/h
Forward - 1
4.5mile/h
Forward - 2
8mile/h
Forward - 4
22.4mile/h
Reverse - 2
8mile/h
Reverse - 1
4.5mile/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
Hydraulic Cycle Time - Total Cycle Time
9.4s
Steering System - Pump Type
Piston
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)
4047psi
Implement System - Maximum Pump Output at 2,390 rpm
68gpm
DEF Tank
4.2gal (US)
Transmission
11.9gal (US)
Fuel Tank Size
76.6gal (US)
Cooling System
13.2gal (US)
Differential - Final Drives - Rear
10gal (US)
Differential - Final Drives - Front
10.6gal (US)
Crankcase
4.8gal (US)
Hydraulic Tank
29.6gal (US)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
73dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
109dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
76 dB(A)*
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value: Note (2)
European Union Directive "2000/14/EC" as amended by "2005/88/EC."
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
73dB(A)
With Cooling Fan Speed at 70% of Maximum Value: Note (1)
For machines in European Union countries and in countries that adopt the EU Directives
With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
107 LWA***
Note (3)
***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
Note (2)
**For machines in European Union countries and in countries that adopt the "EU Directives."
Rack Back - Ground
40 degrees
Height - Top of Exhaust Pipe
11.17ft
Centerline of Rear Axle to Hitch
5.42ft
Lift Arm Clearance
12ft
B-Pin Height
13.75ft
Centerline of Rear Axle to Edge of Counterweight
6.75ft
Ground Clearance
1.5ft
Rack Back - Maximum Lift
60 degrees
Height - Top of Hood
8.75ft
Wheel Base
10.83ft
Height - Top of ROPS
11.33ft
Rack Back - Carry
45 degrees
Note
All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
Note (2)
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Tipping Load - Full Turn - Rigid Tires**
25875lb
Breakout Force
34638lbf
Tipping Load - Full Turn - ISO 14397-1*
24264lb
Note (3)
**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
Operating Weight
41554lb
Note (1)
™, secondary steering, sound " data-metric=""> For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound
Emissions
Tier 4/Stage IV
Standard and optional equipment may vary. Consult your Cat dealer for details.
Engine - Cat C7.1 meets Tier 4 Final/Stage IV emissions standards
Torque converter
Transmission, automatic, power shift (4F/3R), kick-down function, overspeed protection
Brakes, full hydraulic enclosed wet-disc
EIMS (Engine Idle Management System)
EIS (Auto Idle Shutdown)
Fan, radiator, electronically controlled, hydraulically driven, temperature sensing, on demand
Filter, fuel primary-water separator/secondary
Radiator, unit core (9.5 fpi) with ATAAC
Starting aid, glow plugs
Switch, transmission neutralizer lockout
Load sensing implement system pilot operated
Dedicated load sensing steering pump
Dedicated brake and fan gear pump
Alarm, back-up/main disconnect switch
Alternator (145-amp, brush type)
Batteries (2), maintenance free
Ignition key; start/stop switch
Lighting system, halogen (6 total) - Four (4) halogen work lights; Two (2) halogen road lights
Starting and charging system (24-volt)
Starter, electric (heavy duty)
Air conditioning (HVAC) with 10 vents and filter unit located outside of cab
Bucket/work tool function lockout
Cab, pressurized and sound suppressed
Hydroformed (ROPS/FOPS) structure
12V power port (10A)
Coat hook
Radio ready
Rear vision camera and display
Pilot hydraulic controls, lift and tilt function
Computerized monitoring system
Gauges - Engine coolant temperatures/fluid level; Hydraulic/transmission oil temperature; Tachometer/DEF level
Digital indicators - Gear indicator; Speedometer; Service meter units; Fault codes
Warning indicators - Air inlet heater; Electrical malfunction; Engine inlet manifold temperature; Engine oil pressure, fuel level; Fuel pressure high/low; Hydraulic oil level, parking brake; Primary steering oil pressure; Service brake oil pressure; Action light, engine malfunction; Transmission filter bypass
Heater and defroster
Horn
Cup holders and personal tray on right console
Storage tray behind seat
Mirrors, rearview external
Seat, Cat Comfort (clotch) suspension
Seat belt
Steering column, adjustable angle
Wipers/washers (front and rear)
Window, sliding (left and right side)
Tires are available from Triangle, Maxam and Bridgestone
Offerings vary by region. Consult your local Cat dealer for further details
Premixed 50% concentration of extended life coolant with freeze protection to -34° C (-29° F)
Lift and bucket return-to-dig kick outs (Electro-Magnetic), mechanical adjustment
Couplings, Cat O-ring face seal
Doors, service access (locking)
Front fender, steel
Grill, airborne debris
Hitch, drawbar with pin
Hood, wing doors
Hoses, Cat XT
Counterweight
Linkage, Z-bar, fabricated crosstube/tilt lever
SOS oil sampling valves
Sight gauges - Engine coolant, hydraulic oil; Transmission oil level
Diagnostic pressure taps
Product Link Ready
Standard and optional equipment may vary. Consult your Cat dealer for details.
Cold weather starting (jacket water heater, electric and ether starting aid)
Third hydraulic function, additional dedicated single axis level
Quick coupler control
Limited slip differentials
Ride control
Air suspended seat
Secondary steering, electrical
Reversing cooling fan (auto/manual controlled)
Toolbox
Sun visor, rear
High capacity converted 12V/15A
Warning beacon
Extra working lights (4), Halogen or LED
Radio
Fender extensions/roading

4137 mm (163 in) Material Handling Arm, Fusion

4121mm (162in) Mat’l Handling Arm, Fusion™

4585mm (180in) Mat’l handing Arm, Fusion™

1830 mm (72 in) Pallet Fork on 2134mm (84 in) Carriage, Fusion

1830mm (60 in) Pallet Fork on 2134mm (84 in) carriage

2134mm (84 in) on 2438mm (96 in) Carriage Construction Forks

2438mm (96 in) on 2743mm (108 in) Carriage Construction Forks

2438mm (96 in) on 2438mm (96 in) Carriage Construction Forks

2134mm (84 in) on 2743mm (108 in) Carriage Construction Forks

1830 mm (72 in) on 2743mm (108 in) Carriage Construction Forks

1830 mm (72 in) on 2438mm (96 in) Carriage Construction Forks

1524mm (60 in) on 2743mm (108 in) Carriage Construction Forks

1524mm (60 in) on 2438mm (96 in) Carriage Construction Forks

1219mm (48 in) on 2438mm (96 in) Carriage Construction Forks

1219mm (48 in) on 2438mm (96 in) Carriage Construction Forks

950K/M-962K/M Fusion

2.7m³ (3.53yd³) Pin On General Purpose Bucket

3.4m³ (4.50yd³) Performance Series Fusion General Purpose Bucket

3.1m³ (4.00yd³) Performance Series Fusion General Purpose Bucket

2.9m³ (3.75yd³) Horizontal Pin Lock General Purpose Bucket

3.4m³ (4.50yd³) Performance Series Fusion General Purpose Bucket

3.8m³ (5.00yd³) Performance Series Fusion General Purpose Bucket

3.1m³ (4.00yd³) Performance Series Pin On General Purpose Bucket

3.3m³ (4.50yd³) Performance Series Pin On General Purpose Bucket

3.1m³ (4.00yd³) Performance Series Fusion General Purpose Bucket

3.3m³ (4.25yd³) Performance Series Fusion General Purpose Bucket

3.3m³ (4.25yd³) Performance Series Pin On General Purpose Bucket

3.1m³ (4.00yd³) Performance Series Pin On General Purpose Bucket

2.7m³ (3.50yd³) Performance Series Pin On General Purpose Bucket

3.4m³ (4.50yd³) Performance Series Fusion General Purpose Bucket

3.1m³ (4.00yd³) Performance Series Pin On General Purpose Bucket
GET in touch today

    TO TOP