Cat?� 3516C Industrial Diesel Engine

masthead-innerpage-bg
Exterior View

Cat?� 3516C Industrial Diesel Engine

Maximum Power2100 hp
Maximum Torque7563 lb-ft @ 1300 rpm
Rated Speed1750 rpm
Minimum Power2100 hp
product-tabs-bg

Learn more about our Cat?� 3516C Industrial Diesel Engine

The Cat?� 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

Maximum Power
2100hp
Maximum Torque
7563lb-ft @ 1300 rpm
Rated Speed
1750 rpm
Minimum Power
2100hp
Emissions
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
Length
129.1in
Width
60.2in
Height
81.2in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
17284lb
Engine Configuration
V-16, 4-Stroke-Cycle Diesel
Bore
6.7in
Stroke
8.5in
Displacement
4760in³
Compression Ratio
14.7:1
Aspiration
Turbocharged Aftercooled
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Air to Air Aftercooled (ATAAC)
Four turbochargers, center mounted
ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
Thermostats and housing
Gear driven centrifugal jacket water pump
Connections for radiator cooling
Exhaust manifold, dry
Four turbochargers with watercooled bearings
Two exhaust outlets, 203 mm (8 in) round flange
SAE No. 00 flywheel (183 teeth)
SAE No. 00 flywheel housing
Fuel filter, LH spin-on type
Fuel transfer pump
Electronically controlled unit injectors
No standard instrument or gauge panel
Crankcase breather, top mounted
Oil cooler
Oil filler and dipstick, LH
Oil pump
Oil filter, LH, spin-on type
Front sump oil pan, 500-hour change interval
Trunnion front support
Front housing, two-sided
ADEM A4 ECM monitoring system to provide customer programmable engine
Deration strategies to protect against adverse operating conditions
Emergency stop logic inputs provided at 40 pin customer interface connection
Dual 24V electric starting motor, LH, unwired
Paint: Caterpillar yellow
Vibration damper
Lifting eyes
TO TOP