Cat?� C1.1 Diesel Engine

masthead-innerpage-bg

Cat?� C1.1 Diesel Engine

Maximum Power23.8 hp
Maximum Torque60.7 lb-ft @ 1600 rpm
Rated Speed2800 rpm
Minimum Power23.8 hp
product-tabs-bg

Learn more about our Cat?� C1.1 Diesel Engine

The Cat® C1.1 Industrial Diesel Engine is offered in ratings ranging from 14.4-18.4 bkW (19.3-24.7 bhp) @ 1800-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Underground Mining Equipment.

Maximum Power
23.8hp
Maximum Torque
60.7lb-ft @ 1600 rpm
Rated Speed
2800 rpm
Minimum Power
23.8hp
Emissions
U.S. EPA Tier 4 Final
Engine Configuration
In-Line 3
Bore
3in
Stroke
3.2in
Displacement
69in³
Compression Ratio
22.1:1
Aspiration
Naturally Aspirated (NA)/Turbocharged (T)
Combustion System
Indirect Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Total Lubricating Oil Capacity
1.16gal (US)
Length
19.6in
Width
20.1in
Height
23.1in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
238lb
Inlet manifold with choice of inlets.
Alternator 12 volt 65 amp
Starter motor 12 volt
Glow plug starting aid
Belt-driven coolant pump
Coolant temperature switch
SAE No. 6 1/2 flywheel
Choice of SAE No. 5 or standard backplate flywheel housing
U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
Fuel injection pump
Spin-on fuel filter
Low profile oil pan
Spin-on lube oil filter
Lube oil pressure switch
Provision for Power Take Off (PTO)
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request
TO TOP