Cat?� C27 Industrial Power Unit

masthead-innerpage-bg
Exterior View

Cat?� C27 Industrial Power Unit

Maximum Power950 hp
Maximum Torque3211 lb-ft @ 1200 rpm
Rated Speed1800 rpm
Minimum Power800 hp
product-tabs-bg

Learn more about our Cat?� C27 Industrial Power Unit

The Cat?� C27 Industrial Power Unit is offered in ratings ranging from 597-783 bkW (800-1050 bhp)@ 1800 rpm. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Maximum Power
950hp
Maximum Torque
3211lb-ft @ 1200 rpm
Rated Speed
1800 rpm
Minimum Power
800hp
Emissions
U.S. EPA Tier 4 Final, EU Stage V
Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Bore
5.7in
Stroke
6in
Displacement
1649.5in³
Compression Ratio
16.0:1
Aspiration
Twin Turbocharged-Aftercooled (TTA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC
Turbocharged
Air-to-Air Aftercooled
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Remote fan control
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Integrated Electronic Control Unit (ECU)
Thermostats and housing, vertical outlet
Centrifugal water pump
Guidance on cooling system design available through your dealer to ensure equipment reliability
Choice of SAE No. 0 or SAE No. 1 flywheel housing
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
MEUI injection
Primary fuel filter
Secondary fuel filters
Fuel transfer pump
Electronic fuel priming
Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Oil dipstick
Gear driven oil pump
Choice of front, rear or center sumps
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
Paint: Caterpillar yellow, with optional colors available at request
Cat Regeneration System
Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Aftertreatment Electronic Control Unit (ECU)
NOx Reduction System (NRS)
Pump Electronic Control Unit (PETU)
Selective Catalytic Reduction (SCR)
Available in 12V or 24V systems
TO TOP