Cat?� C9.3B Industrial Power Unit HRC

masthead-innerpage-bg
Exterior View

Cat?� C9.3B Industrial Power Unit HRC

Maximum Power456 hp
Maximum Torque1540 lb-ft @ 1400 rpm
Rated Speed1800-2200 rpm
Minimum Power335 hp
product-tabs-bg

Learn more about our Cat?� C9.3B Industrial Power Unit HRC

The Cat?� C9.3B Industrial Diesel Power Unit is offered in ratings ranging from 250-340 kW (335-456 hp) @ 1800-2200 rpm and meet U.S. EPA Tier 4 Final, EU Stage V emission, China Nonroad Stage IV, Japan 2014 (Tier 4 Final) and Korea Stage V standards. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Maximum Power
456hp
Maximum Torque
1540lb-ft @ 1400 rpm
Rated Speed
1800-2200 rpm
Minimum Power
335hp
Emissions
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014 (Tier 4 Final) and China Nonroad IV
Engine Configuration
Inline 6, 4-Stroke-Cycle-Diesel
Bore
4.5in
Stroke
5.9in
Displacement
567.5in³
Compression Ratio
17.0:1
Aspiration
Turbocharged Aftercooled (TA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR
Length
83in
Width
43in
Height
68.5in
Weight
3563lb
Width
34.3in
Height
22.4in
Weight
468lb
Diameter
13in
Turbocharged
Air-to-Air Aftercooled
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), China Nonroad Stage IV and Korea Stage V)
Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Integrated Electronic Control Unit (ECU)
Remote fan control
Vertical or RH thermostat outlet
Centrifugal water pump
Guidance on cooling system design available through your dealer to ensure equipment reliability
Dual rear PTO configuration
Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) China Nonroad Stage IV and Korea Stage V
Electronic high pressure common rail
Primary fuel filter
Secondary fuel filters
Fuel transfer pump
Electronic fuel priming
Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Oil dipstick
Gear driven oil pump
Choice of front, rear or center sumps
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), China Nonroad IV, Korea Stage V)
SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
Vibration damper
Lifting eyes
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Pump Electronic Control Unit (PETU)
Available in 12V or 24V systems
Selective Catalytic Reduction (SCR)
TO TOP