Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Bensalem Campus 215-639-4300
Piscataway Campus 732-885-5555
Careers
Careers
Careers
Compact Equipment OffersFoley Spring 2024 EDAFind Us on the Web

903D Compact Wheel Loader
Exterior View
Interior View

903D Compact Wheel Loader

Maximum Gross Power42 hp
Engine ModelCat C2.4*
Gross Power42 hp
Net Power – 2,200 rpm – SAE J1349 R-ing40 hp
product-tabs-bg

Learn more about our 903D Compact Wheel Loader

The Cat® 903D is compact, yet powerful, delivering high performance with outstanding versatility. A 25% increase in lift capacity and travel speed will allow the operator to be more productive, while new optional features such as engine and ground speed control, provides customizable control when running hydro-mechanical work tools. With a more ergonomic cab, new multi-function joystick, and optional ride control, the 903D allows the operator to enjoy all day comfort.

Maximum Gross Power
42hp
Engine Model
Cat C2.4*
Gross Power
42hp
Net Power - 2,200 rpm - SAE J1349 R-ing
40hp
Net Power - 2,200 rpm - ISO 9249 R-ing
40hp
Bore
3.4in
Stroke
4in
Displacement
147in²
Note
*Engine meets U.S. EPA Tier 4 Final emission standards.
Operating Weight
9414lb
Bucket Capacities
0.6-1.0 m3 (0.8-1.3 yd3)
Bucket Capacities - General Purpose
0.6 m3 (0.8 yd3)
Bucket Capacities - Light Material
1.0 m3 (1.3 yd3)
Travel Speed
12.4mile/h
Main Relief
3481psi
3rd Auxiliary Flow
14gpm
Hydraulic Cycle Time - Lower, Float
2.4s
Hydraulic Cycle Time - Lift
4.4s
Hydraulic Cycle Time - Dump
0.7s
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Cooling System
3gal (US)
Fuel Tank
11.4gal (US)
Hydraulic System
6.3gal (US)
Engine Oil
2.4gal (US)
Cab Height
8.25ft
Ground Clearance
10in
Wheel Base
6.42ft
Overall Length - With Bucket*
15.75ft
Reach at Maximum Dump Height*
2.33ft
Dig Depth
6in
Maximum Dump Height*
7.5ft
Load Over Height
9.17ft
Hinge Pin at Maximum Height
10.08ft
Departure Angle - Degrees
30°
Overall Length - With Forks
17.08ft
Reach - Ground Level
2.67ft
Maximum Reach
4.5ft
Fork Depth Above Ground
2in
Fork Height at Maximum Reach
4.67ft
Maximum Fork Height
9.83ft
Fork Reach at Maximum Height
2ft
Turning Radius - Over Bucket*
13.17ft
Turning Radius - Inside Tire**
5.92ft
Width - Over Bucket*
5.83ft
Tire Gauge
4.33ft
Machine Width**
5.58ft
Articulation Angle
40°
Steering Angle
80°
Dump Angle at Maximum Height
40°
Note (1)
*Vary with bucket size.
Note (2)
**Vary with tire size.
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Cab Height
8.25ft
Ground Clearance
10in
Wheel Base
6.42ft
Overall Length - With Bucket*
16.17ft
Reach at Maximum Dump Height*
2.42ft
Dig Depth
8in
Maximum Dump Height*
8ft
Load Over Height
9.67ft
Hinge Pin at Maximum Height
10.58ft
Departure Angle - Degrees
30°
Overall Length - With Forks
17.58ft
Reach - Ground Level
3.25ft
Maximum Reach
4.92ft
Fork Depth Above Ground
2in
Fork Height at Maximum Reach
4.67ft
Maximum Fork Height
10.33ft
Fork Reach at Maximum Height
2ft
Turning Radius - Over Bucket*
13.42ft
Turning Radius - Inside Tire**
5.92ft
Width - Over Bucket*
5.83ft
Tire Gauge
4.33ft
Machine Width**
5.58ft
Articulation Angle
40°
Steering Angle
80°
Dump Angle at Maximum Height
40°
Note (1)
*Vary with bucket size.
Note (2)
**Vary with tire size.
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Tire Size
33 × 15.5-16.5, 12 PR
Rated Bucket Capacity
0.8yd³
Breakout Force
6160lbf
Operating Weight
9414lb
Rated Operating Load at Full Turn - Bucket***
2701lb
Straight Tipping Load - Bucket***
6415lb
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5401lb
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5512lb
Rack Back - Transport Position
51°
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3366lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2524lb
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3)
***Manual quick coupler, precleaner hood.
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Tire Size
33 × 15.5-16.5, 12 PR
Rated Bucket Capacity
0.8yd³
Breakout Force
6204lbf
Operating Weight
9462lb
Rated Operating Load at Full Turn - Bucket***
2502lb
Straight Tipping Load - Bucket***
5975lb
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5004lb
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5115lb
Rack Back - Transport Position
51°
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3148lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2361lb
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3)
***Manual quick coupler, precleaner hood.
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Bucket Type
General Purpose
Rated Capacity
0.8yd³
Dump Height
90in
Maximum Material Density
3169lb/yd³
Bucket Width
70in
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Bucket Type
Light Material
Rated Capacity
1.3yd³
Dump Height
85in
Maximum Material Density
1989lb/yd³
Bucket Width
74in
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Recyclability
97%
Air cleaner, two stage with visual indicator
Cat C2.4 engine:
– Meets U.S. EPA Tier 4 Final emission standards
Closed circuit breather
Cold start plugs
Electrical fuel priming pump
Eco drain, engine oil
Extended life coolant protects to –37° C (–34° F)
Frame mounted heavy duty axles with outboard planetary reduction
Maintenance free, sealed for life, prop shaft and universal joints
Transmission, 20 km/h (12.4 mph)
12 volt direct electric starting
Alternator, 70A
Battery disconnect switch
Cab mounted fuse panel
Ignition key start/stop switch
Maintenance free, sealed for life, 650 CCA heavy duty battery
Cup holder
Digital service hour meter
Engine coolant temperature gauge
Fuel level gauge
Heavy duty, easy clean floor mat
Operator warning system indicators:
– DPF monitor
– Parking brake applied
– Hydraulic oil temperature
– Engine oil pressure
– Service brake pressure
– Hydraulic filter bypass
Seat:
– Static, vinyl with 51 mm (2 in) retractable seat belt
Two external mirrors – knock back
3rd valve auxiliary hydraulics with continuous flow detent, standard flow
Engine enclosure – lockable
Guarded front headlight
Hydraulic auxiliary lines with quick disconnects
Hydraulic oil level sight gauge
Lift arm safety brace
Loader arm float function
Lockable fuel filler cap
Manual quick coupler, skid steer loader compatible
Parking brake (secondary brake)
Product Link™, PL243
Quick release fuel filter/water separator
Reversing light
Self-canceling direction indicators
Work tool return to dig
Z-bar linkage
Air conditioning/heater
Alternator, 90 amp for air conditioning
Antifreeze/coolant, extended life, protects to –50° C (–58° F)
Beacon ready
Cab:
– Open
– Enclosed
Differential lock, front and rear axles
Hydraulic quick coupler, skid steer loader compatible
Engine air precleaner
Engine block heater 120V (dealer installed)
Engine Speed Control (Throttle Lock)
Fenders:
– Rear only
– Front and rear
Ground Speed Control (Creeper Control)
Linkage:
– Standard lift
– High lift
Radiator debris screen
Radio Ready or AM/FM radio
Ride Control
Seats:
– Mechanical suspension, vinyl with 51 mm (2 in) seat belt
– Mechanical suspension, vinyl with 75 mm (3 in) seat belt
– Mechanical suspension, fabric with 51 mm (2 in) seat belt
– Mechanical suspension, fabric with 75 mm (3 in) seat belt
Tires:
– 12-16.5 10PR
– Flotation 33-15.5 × 16.5
– Flexport™ 33 × 6 × 11
Working lights, front and rear:
– Halogen
– LED
Work Tool Electrical Harness
For all work tool options, consult your Cat dealer.

T112 Manual Trencher With Rock-Frost Teeth

T112 Manual Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With Combo Teeth Chain

T112 Manual Trencher With Combo Teeth Chain

T112 Manual Trencher With No Chain

T112 Hydraulic Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With No Chain

T109 Manual Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With Standard Teeth Chain

T112 Hydraulic Trencher With Rock-Frost Teeth

T109 Manual Trencher With No Chain

T109 Manual Trencher With Standard Teeth Chain

T109 Manual Trencher With Rock-Frost Teeth

T109 Manual Trencher With Terminator Teeth Chain

T109 Manual Trencher With Combo Teeth Chain

T109 Hydraulic Trencher With Combo Teeth Chain

T109 Hydraulic Trencher With No Chain

T109 Hydraulic Trencher With Standard Teeth Chain

T109 Hydraulic Trencher With Standard Teeth Chain

T109 Hydraulic Trencher With Rock-Frost Teeth

LT114 Landscape Tiller

T109 Hydraulic Trencher With Terminator Teeth Chain

LT118 Landscape Tiller

SG16 Stump Grinder

SR121 Snow Blower

SR118 Snow Blower

LR119 Landscape Rake

LR116 Landscape Rake

1676 mm (66 in) Industrial Grapple Forks

1829 mm (72 in) Industrial Grapple Forks

CV117 Vibratory Drum Compactor

CV119 Vibratory Drum Compactor

1883 mm (74 in) Utility Grapple Bucket

1730 mm (68 in) Utility Grapple Bucket

1883 mm (74 in) Utility Bucket With Bolt-On Cutting Edge

1730 mm (68 in) Utility Bucket With Bolt-On Cutting Edge

1576 mm (62 in) Utility Bucket With Bolt-On Cutting Edge

2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard

2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard

2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard

2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard

1883 mm (74 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard

1883 mm (74 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard

1576 mm (62 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard

1576 mm (62 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard

1730 mm (68 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard

1730 mm (68 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard

MB250 Mixing Bucket

2642 mm (104 in) Material Handling Bucket With Bolt-On Cutting Edge

MB200 Mixing Bucket

2490 mm (98 in) Light Material Bucket With Bolt-On Cutting Edge

2036 mm (80 in) Light Material Bucket With Bolt-On Cutting Edge

1883 mm (74 in) Light Material Bucket With Bolt-On Cutting Edge

2185 mm (86 in) Light Material Bucket With Bolt-On Cutting Edge

1883 mm (74 in) Industrial Grapple Bucket With Bolt-On Cutting Edge

2036 mm (80 in) Industrial Grapple Bucket With Bolt-On Cutting Edge

1730 mm (68 in) Industrial Grapple Bucket With Bolt-On Cutting Edge

1576 mm (62 in) Industrial Grapple Bucket With Bolt-On Cutting Edge

2036 mm (80 in) General Purpose Bucket With Bolt-On Teeth

2036 mm (80 in) General Purpose Bucket With Bolt-On Cutting Edge

2188 mm (86 in) General Purpose Bucket With Bolt-On Teeth

2188 mm (86 in) General Purpose Bucket With Bolt-On Cutting Edge

1883 mm (74 in) General Purpose Bucket With Bolt-On Teeth

1730 mm (68 in) General Purpose Bucket With Bolt-On Cutting Edge

1576 mm (62 in) General Purpose Bucket With Bolt-On Cutting Edge

1730 mm (68 in) General Purpose Bucket With Bolt-On Teeth

1883 mm (74 in) General Purpose Bucket With Bolt-On Cutting Edge

1576 mm (62 in) General Purpose Bucket With Bolt-On Teeth

1.0 m3 (1.3 yd3) Skid Steer Coupler High Dump Bucket With Bolt-On Cutting Edge

0.6 m3 (0.8 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge

BP118C Pickup Broom

BP115C Pickup Broom

BA118C Manual Angle Broom With Polypropylene/Wire Bristles

2137 mm (84 in) Industrial Grapple Rake

1829 mm (72 in) Industrial Grapple Rake

1893 mm (74 in), 0.41 m3 (0.54 yd3) Low Profile Bucket With Bolt-On Cutting Edge

1740 mm (68 in), 0.37 m3 (0.48 yd3) Low Profile Bucket With Bolt-On Cutting Edge

1586 mm (62 in), 0.34 m3 (0.44 yd3) Low Profile Bucket With Bolt-On Cutting Edge

BA118C Hydraulic Angle Broom With Polypropylene/Wire Bristles

2036 mm (80 in) Low Profile Bucket With Bolt-On Cutting Edge

1421 mm (56 in) Low Profile Bucket With Bolt-On Cutting Edge
GET in touch today

    TO TOP