Cat?� C18 Industrial Power Unit

masthead-innerpage-bg

Cat?� C18 Industrial Power Unit

Maximum Power630 hp
Rated Speed1800-2100
Minimum Power575 hp
EmissionsChina Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent or Non-Certified
product-tabs-bg

Learn more about our Cat?� C18 Industrial Power Unit

The Cat?� C18 Industrial Power Unit is offered in ratings ranging from 429-470 kW (575-630 hp) @ 1800-2100 rpm. These ratings meet China Stage II , U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent or Non-certified emission standards. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Maximum Power
630hp
Rated Speed
1800-2100
Minimum Power
575hp
Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent or Non-Certified
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
5.7in
Stroke
7.2in
Displacement
1104.5in³
Compression Ratio
16.3:1
Aspiration
Turbocharged Aftercooled (TA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Length
54.6in
Width
36.3in
Height
48.9in
Weight
4844lb
Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
Air-to-Air Aftercooled
Charging alternator 24 volt, 50 amp
Electronic governing, PTO speed control
Programmable ratings
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and total engine limit
Electronic diagnostics and fault logging
Engine monitoring system SAE J1939 broadcast and control
ADEM A4 Electronic Control Unit (ECU)
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Exhaust manifold, dry
Optional exhaust outlet
SAE No. 1 flywheel housing
MEUI injection
Fuel filter, secondary (2 micron)
ACERT Technology
Fuel transfer pump
Fuel priming pump
Crankcase breather
Oil cooler
Oil filler
Lube oil filter
Front sump oil pan
Oil dipstick
Gear driven oil pump
Vibration damper
Lifting eyes
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request
TO TOP