G3608 A4 Gas Compression Engine

masthead-innerpage-bg
Exterior View

G3608 A4 Gas Compression Engine

Maximum Rating2750 BHP
Rated Speed1000 rpm
EmissionsLean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
Minimum Rating2500 BHP
product-tabs-bg

Learn more about our G3608 A4 Gas Compression Engine

G3600 ADEM4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3608 ADEM4 Gen 1 gas engine with standard ratings: 1864 bkW (2500 bhp) @ 1000 rpm and Cat G3608 ADEM4 Gen 2 gas engine standard ratings: 1864 bkW (2500 bhp) @ 1000 rpm and uprated ratings: 2051 bKW (2750 bhp) @ 1000 rpm. NSPS site compliant capable.

Maximum Rating
2750BHP
Rated Speed
1000rpm
Emissions
Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
Minimum Rating
2500BHP
Compression Ratio
Gen 1 (9.2:1) Gen 2 (7:6:1)
Length
199.62in
Aspiration
Turbocharged-Aftercooled
Width
2188.8mm
Rotation from Flywheel End
Counterclockwise
Displacement
10350in³
Height
116.18in
Flywheel Teeth
255
Oil Change Interval
5000 hours
Ignition, Protection
™4" data-metric=""> ADEM4
Stroke
11.8in
Weight - Dry
46500lb
Bore
11.8in
Cooling System
140gal (US)
Lube Oil System - Refill
241gal (US)
Air Cleaner
Air Inlet Adapter
ADEM 4
ANSI Class 150 4 inch Flange (outlet water connection)
ANSI Class 150 6 inch Flange (Inlet Water connection)
Engine driven water pump
Water Jacket Outlet Regulator 88° C
Engine rating and speed selection
Hard heat shielded exhaust manifolds. SAE Standard
Vertical Exhaust Outlet
Flywheel SAE Standard
ANSI Class 150 2 inch Flange (Customer Connection)
Fuel Filter
Gas Pressure regulator
Paint
Basic HMI Engine Interface
Breathers
Closed Crankcase ventilation system
Engine driven oil pump
Front and Rear Oil Drains
Oil filter
Oil Pan
Oil Supply line
Pre-lubrication Pump
Temperature regulated oil cooler
Six mounting feet
Two Lifting eyes
Damper guard, Stub Shaft
Single Damper
Crankcase explosion relief valve
Air starting motor
Engine Barring Device
Cat Connect Technology
Heavy-duty air cleaner — with precleaners
Software Development
Exhaust Expander
Flex EXH Fitting
Weld Flange EXH
Fuel Connection
Language Decals
Service Tools
Lubricating Oil
Oil Level regulator
Six mounting plates
Cell - Satellite Radio
Interconnect Harness
LAN Adapter
Product Link Harness
TO TOP