Industrial
Cat® C1.7 Diesel Engine
-
Maximum Power23.8 hp
-
Maximum Torque92 lb-ft @ 1800 rpm
-
Rated Speed2200 rpm
-
Minimum Power23.8 hp
Power Rating
- Maximum Power
- 23.8 hp
- Maximum Torque
- 92 lb-ft @ 1800 rpm
- Rated Speed
- 2200 rpm
- Minimum Power
- 23.8 hp
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final
General
- Engine Configuration
- In-Line 3, 4-Stroke-Cycle Diesel
- Engine Configuration
- In-Line 3
- Bore
- 3.3 in
- Stroke
- 3.9 in
- Bore
- 84 mm (3.3 in)
- Displacement
- 103.7 in³
- Compression Ratio
- 23.0:1
- Stroke
- 100 mm (3.9 in)
- Aspiration
- Naturally Aspirated (NA)/Turbocharged (T)
- Combustion System
- Indirect Injection
- Displacement
- 1.7L (103.7 in³)
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Total Lubricating Oil Capacity
- 1.58 gal (US)
- Cooling System Capacity
- 2.8L (2.96 qt)
- Cooling System
- 2.8L (2.96 qt)
- Lube System
- 3.6L (3.8 qt)
- Lube System
- 3.6L (3.8 qt)
Engine Dimensions - Approximate
- Length
- 25.2 in
- Width
- 19.7 in
- Height
- 25.3 in
- Weight
- 368 lb
- Height
- 736 mm (28.9 in)
- Length
- 640 mm (25.2 in)
- Weight
- 190 kg (419 lbs)
- Width
- 545 mm (21.4 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 640 mm (25.2 in)
- Width
- 545 mm (21.4 in)
- Height
- 736 mm (28.9 in)
- Weight
- 190 kg (419 lbs)
Aftertreatment Dimensions
- Length
- 22.5 in
- Weight
- 12.8 lb
Aftertreatment Dimensions*
- Diameter
- 6.1 in
Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 408.4 mm (16.07 in)
- Weight
- 5.8 kg (12.79 lb)
- Diameter
- 155 mm (6.1 in)
Aftertreatment Dimensions - Approximate
- Diameter
- 155 mm (6.1 in)
- Length
- 408.4 mm (16.0 in)
- Weight
- 5.8 kg (12.79 lb)
-
Air Inlet System
- Standard air cleaner
- Turbocharger
-
Control System
- Alternator 12 volt 85 amp
- Starter motor 12 volt
- Glow plug starting aid
- Electronic control unit
- Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
- All connectors and wiring harness are waterproof and designed to withstand harsh non-road environments
- Robust reliable sensors
-
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
- Fan drive options
-
Flywheel & Flywheel Housing
- Flywheel and flywheel housing options
-
Fuel System
- Electronic 2000 bar common rail fuel system
- Spin-on fuel filter
- Simple pintle nozzle injectors
-
Lube System
- Spin on oil filter
- Lube oil pressure switch
- Sump options for various applications
-
Power Take Off (PTO)
- SAE A PTO drive
-
General
- Cast iron, engine block
- Cast iron exhaust manifold options
- Paint: Caterpillar yellow, with optional colors available at request
- Induction manifold options
- Engine mounting
- Block heater provision
-
U.S. EPA Tier 4 Final Aftertreatment/Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)